I am looking for anyone who has or can direct me to, complete interior wiring diagrams for my '91 Grand Caravan. I am stripping out the overhead trip computer,...
The green bean is about to get torn down for a ground up rebuild. I figure by the time its finished, only the original axles, springs and from will be left,...
Jschier270@...
Feb 3, 2002 4:39 pm
2335
sounds like an owwie i am in process of converting old blue 62 d 200 into a 4x4 frame up conversion i have taken a 76 440 and put it with a 70 4x4 tranny...
KKenningston@...
Feb 3, 2002 5:20 pm
2336
HELLO EVERYONE I AM LOOKING FOR A USED 5.9 CUMMINS AND TRANS FOR MY OLD POWERWAGON. DROP ME A LINE IF YOU KNOW WHERE ONE IS FOR SALE. THANKS, Matt [Non-text...
MMMOPARJEP@...
Feb 4, 2002 4:39 am
2337
Check out Lakewood Industries. They are part of the Mr. Gasket product line. www.mrgasket.com I know they have bell housings to run 5 & 6 spds on the old big...
Hi there, Hoping someone can shed some light on a problem I am having. I have a 99 dodge 4X4 halfton, with the 360 motor. After the engine warms up I notice a...
Yes, there is a service bulletin about this that your local Dodge dealer should have. It's a flaw with the intake manifold gasket. This problem was just...
I'm looking for a lower grille bar that I can chrome. Surface rust OK on back and bottom, but the top and front need to be rust and dent free. Thanks, Steve....
I am looking for grill pieces for my 52 Dodge pickup. I have the centre pieces. I had them chromed. The outer pieces of the grill are not solid enough to be...
Bruce White
bwgraphs@...
Feb 15, 2002 1:22 am
2343
One of the guys at work has got me interested in a disk brake conversion. Using the stock axle. Has anyone got any pictures of how you mounted everything?...
Seeking a rear chrome step bumper with top rubber mats, for a 1992 Dodge Dakota p/u truck.. must be in good shape and str8.. please contact me asap if you have...
I have an 81 Dodge 3/4 ton 4x4 with a 360. It has the stock 4 bbl Holley [ it was special ordered because it was used by the Sheriffs Dept] I have been having...
Automatic choke is working backwards. When I drive 10 miles to town and shut down and start back up - the automatice choke comes on and takes 3 to 4 minutes...
Jerry
postcards1@...
Feb 25, 2002 10:59 pm
2349
The vehicle may have the wrong choke linkage or reversed. Does the carb have a vacuum pull-off on the choke sytem?...
thanks, I'll check that out. ... From: "jrw" <jrwillms@...> To: <DODGETRUCKS@yahoogroups.com> Sent: Monday, February 25, 2002 6:17 PM Subject: Re:...
Jerry
postcards1@...
Feb 25, 2002 11:30 pm
2351
tell what i did with my 360,i took the stock carb out and replaced it with an edlebrock intake and 500carb what a differance power on demand and alot better...
Gti2000ray@...
Feb 26, 2002 7:56 pm
2352
I'll second that vote on the Edlebrock. I run a 650cfm on the wife's 360 Dart and a 600 on my 318 D-100....both work flawlessly! They can be tuned if one knows...
mark wallace
yiffenmaw@...
Feb 26, 2002 8:08 pm
2353
ok someone help: i have a 1957 dodge panel i need the one trim that goes across the front nose clipp just below the head lights, any info let me know...
Gti2000ray@...
Feb 26, 2002 8:23 pm
2354
Have you asked on the tw-list yet? You will probably get a better response there. Mark in MN ... __________________________________________________ Do You...
I just bought a 1963POWER WAGON and I'm not sure it has the right grill in it.The grill has 100 on it but the truck is a 3/4 ton shortbed stepside pickup.I...
The grill should say 200 for a 3/4 ton. Paul........Many body parts avail. used here in So. Calif. Local car dealer has a Dodge van/truck about a 1965 for sale...
Redwelder@...
Feb 27, 2002 3:33 pm
2357
A good place to get more info on the power wagon's is www.dodgepowerwagon.com and then go to the forum. There is lots of good info there as well as a bunch of ...
Hello, Where can I find information about the rearend that is in my pickup and interchanges that will bolt in? It is a factory 318 with a 727. Thanks Dirk -...
mail
fndit@...
Feb 27, 2002 6:33 pm
2360
What gears dos it have? that could make a big difference trade you for my 70 W-300 /6 gets 12 -17 mpg ... From: chevybb4 To: DODGETRUCKS@yahoogroups.com ...
In a message dated 02/27/2002 11:15:26 AM Mountain Standard Time, ... I have a 1998 3500 V-10 which I use as a work truck and weighs a little better than 12000...
