The Laboratory Robotics Interest Group Discussion Mail List is for comments or questions about Laboratory Robotics and Automation. You receive messages...
lrig-discussion@yahoo...
Apr 1, 2002 12:26 pm
1499
malachi, I have used the 710 with the APT software you describe. I never encountered the problem you are experiencing. I would start my debugging with an ...
Smith, S Todd
todd_smithnw@...
Apr 1, 2002 2:39 pm
1500
malachi, I have used the 710 with the APT software you describe. I never encountered the problem you are experiencing. I would start my debugging with an ...
Smith, S Todd
todd_smithnw@...
Apr 1, 2002 4:31 pm
1501
CRS Robotics has a 200 plate carousel that can be randomly accessed using one of our F3 robots. Alternatively, you could use two of our 120 plate carousels...
Hi Ad Most standard liquid handlers will perform this function, so I will throw Hamiltons hat into the ring and suggest the ML-STAR, or if you require a 96 ...
David Ley
david.ley@...
Apr 2, 2002 6:55 pm
1503
Hi James The Cytomat carousel is inexpensive and easy to integrate with a reasonable capacity. If you want an option you could check out Liconics. For higher...
David Ley
david.ley@...
Apr 2, 2002 6:56 pm
1504
James, Zymark's Twister II could give you a very easy to integrate solution to your plate storage needs for your ORCA system. The Twister II could be ...
It is time we wrapped up this discussion thread. If anyone else wants to pipe in here it will have to be a user with direct experience or it must take the form...
Hello, I'm looking at TRF readers for a process at my company. Can anyone recommend any plate readers which can do TRF (only TRF is needed) quickly, reliably...
The BMG fluostar does a good job and can be easily loaded by a robotic device. The draw back is the calculation software which is excel based and not very...
Victor V from Wallace (Perkin Elmer) is an excellent one. Analyst from LJL (Molecular devises) is also good. Chakk ... From: Neil Benn...
Ramesha, Chakk {High~...
chakk.ramesha@...
Apr 5, 2002 4:27 pm
1509
Neil, In addition to the multifunction FLUOstar that Gernot mentioned, BMG also makes a dedicated TRF reader, the RUBYstar. The RUBYstar is fast and accurate....
Hello Neil, The most accurate answer, of course, is "what kind of TRF assays are you doing?" If you are doing standard Lanthanide chelates, you won't find a...
G. S. Hudson
gshudson@...
Apr 6, 2002 3:35 am
1511
I need a 96 well filter plate which excludes anything over circa 5KDa. The best I've been able to find are 0.45 micron filter plates, which of course have an...
Oliver de Peyer
opeyer@...
Apr 8, 2002 6:06 pm
1512
MolDev Analyst/ Tecan Ultra would be a good bet. Richard Martin ... From: Neil Benn [mailto:neil.benn@...] Sent: Friday, April 05, 2002 9:42...
Looking for information on new designs for pipette tips and trays. Can anyone suggest something. Looking for new materials, designs for proprietary machines....
John W. Michaud
jmichaud@...
Apr 8, 2002 9:08 pm
1514
*** VIRUS ALERT *** A number of you contacted me today regarding a email message with a virus payload that came to you. Unfortunately, one of our list ...
This is in response to the earlier message from Dr Oliver de Peyer, to wit: "I need a 96 well filter plate which excludes anything over circa 5KDa. The best...
Hardy, Larry
larry.hardy@...
Apr 8, 2002 9:10 pm
1516
Dear Larry, Many thanks for your helpful tip. This is tantalisingly close to what I need... what I am really looking for was a spin-through plate of some sort....
Oliver De Peyer
opeyer@...
Apr 9, 2002 4:39 am
1517
Hello John, You should contact Porex Bio-Products for information on tips. They have been very helpful in working with us on tips for one of our new...
hello, I am looking for a dry block incubator for incubating tubes in a size of 12x75 mm. Temperature range: room temperature to 100°C It should have cool...
u.taibon@...
Apr 10, 2002 2:13 am
1519
Dear Ulrich Have a look at www.inheco.com They have some Peltier controlled heaters and are capable of making adaptations to desired tube sizes Br, Gernot ...
Hi This message stems from a discussion thread a while back in February on LRIG. I was interested in integrating an ultrasonicator in an automated system for ...
Adam, Shiraz
shiraz_adam@...
Apr 11, 2002 8:00 pm
1522
I believe Tomtec sells one as an option with their pipettors. There are likely other pipettor vendors who can provide the same. Regards, Al ... From: Adam,...
Hi Adam, Sonics and Materials of Danbury Connecticut is a major force in the business. It also makes it own titanium horns, so it can customize. They do not...
Bob Mc Cafferty
biotica@...
Apr 12, 2002 2:28 am
1524
Hi Shiraz, Tomtec has one, which is designed and manufactured specifically for tip-washing on a sample preparation station. I don't know who represents Tomtec...
G. S. Hudson
gshudson@...
Apr 12, 2002 2:28 am
1525
Ulrich, If you cannot find what you want exactly, contact me at SLR Systems. We design and manufacture custom peripherals and could provide you with such a...
Rodney Stockton
rodney@...
Apr 12, 2002 4:38 am
1526
Hello, An electrical engineer I used to work with simply got a sonicator, wired the power via a relay to a magic eye sensor. This was then triggered by the...
Frank, Currently, I know of no online users group for the FX. I am a primary user and would be very interested in participating in such a group. I will ask ...
