The Laboratory Robotics Interest Group Discussion Group is for comments or questions about Laboratory Robotics and Automation. You receive messages posted to...
lrig-discussion@yahoo...
Sep 1, 2005 12:15 pm
4540
Hi Lynn I did integrate a standard office scanner on one of our Robot systems. The plates are scanned from the bottom. You can use a image analysis program to...
Does anyone know of equipment that can unscrew a cryovial cap, and then put it back on? Please advise. Bob McCafferty biotica@... [Non-text...
Bob McCafferty
biotica@...
Sep 1, 2005 4:32 pm
4542
Have a look at 10 kDa filter plates from Millipore http://www.millipore.com/catalogue.nsf/docs/C8589 Cheers, Gernot Gernot J Abel Science Manager Novozymes A/S...
Hello Bob, Our FLASH systems are designed to uncap and recap vials (as well as fill, label, inspect, etc.). An image of a cap being screwed onto a vial is ...
psmith@...
Sep 1, 2005 10:45 pm
4545
Bob, I integrated a de-capper into a customers system and the same company was working on a capper. Contact me directly and I'll provide you with some leads. ...
Hi Shag, I see there have been several responses to this, but since I am am also looking for a similar item I will share what I have found. From a vendor I am...
Does anyone know of a vendor, or has anyone developed developed independantly, a good way of directing a flow of HEPA filtered air to a specific point of...
Hello, Now the dust has settled (;-)), I'm looking to revive my idea of writing a technical article detailing programming languages that are possible for use...
Hello and Welcome to September, We have a Spectramax plate reader with a problem. One of our students, a previous unidentified instrument killer, tried to...
Does anyone have experience with using barcode labels in an autoclave? Some of our samples have to be heated in one, and we've found it difficult to find...
Hi Neil, Well of course you should include FORTH. Although not widely known in the computer world (although Sun micros boot up in Forth) it is an ideal control...
I think it's likely that the door sensor was damaged. Confirm with MD and they can probably just send you a sensor. Jim Follen Automation Engineer Novartis...
We are making a 48 well tray that has round bottom wells and is 1.4 cm high. If you contact me I will send you a sample. Art Robbins Art Robbins Instruments ...
Art Robbins
art@...
Sep 7, 2005 6:31 pm
4557
Hello Neil Here is my little piece on LabVIEW. It's in MS Word No macros. Are you going to put them up on teh WWW? If Wikipedia would have this group of...
IMHO, the reviews for C# and VB.NET would be the same. The differences are so small (and getting smaller) it is probably not worth the bandwidth to talk about...
kebaldwin@...
Sep 7, 2005 6:32 pm
4559
In re-reading this message this morning I realized that I had neglected to give the link to the on-line discussion for this group. It is: ...
John, We disabled the attachments feature of the Discussion List to prevent the possibility of virus attachments going out to our members. Can you send the...
Hi John, Like you my enthusiasm for the Internet is such that I see an information age at the end of the iron age. But Democracy is always open to abuse....
Does the door seem loose when moved? or changes its holding force (torque) between the instrument off and on state? Amer El-Hage Principal Beeston Engineering...
Try to read and then clear the errorlog in the softmax pro software! It might help, if it´s not a sensorproblem. Kim Bidsted amerhaj@... wrote: Does the...
Dear All, We are looking for a software system to management scientific images, such as tissue images and 2-D gel images. We are considering a product from...
Hello We have a Bohdan weigher that gives excellent service. Now we need to upgrade the software to WinXP and I have a little problem. There are several racks...
http://www.htservices.com/Tools/MachineVision/index.htm Keith Baldwin High Tech Services KeithBaldwin@... ... From: Ping Du <ping_du_2003@...>...
kebaldwin@...
Sep 16, 2005 12:36 am
4568
we have a Multiprobe (9 months)which frequently gives the error message that the instrument can not be found through the CAN board which is a USB connection. ...
