The Laboratory Robotics Interest Group Discussion Group is for comments or questions about Laboratory Robotics and Automation. You receive messages posted to...
lrig-discussion@yahoo...
Dec 1, 2007 8:52 am
5895
Biosero has a line of capper/de-cappers, one of which might work for you. http://www.bioseroinc.com/Decapper_Recappers.htm Jeremy Lawton Apricot Designs, Inc. ...
Dear all, Does anybody have experience of pipetting gluathione resin with a pipetting robot? The manufacturers keep telling me to use a wide bore tip, but as...
Oliver de Peyer
opeyer@...
Dec 4, 2007 7:57 pm
5898
Wide bore tips were avaiable from Hamilton. They custom make them by removing a small portion of the tip of the tip. Although i have no experience...
Through the years?I have seen?occasionally glass,?Fused silica?or Sapphire microplates. Glass microplates?are heavy, delicate, with large thermal mass. They...
There are tubes available from Thermo Scientific, Matrix Liquid Handling line (http://www.matrixtechcorp.com/storage-systems/solutions.aspx?id=70) (and only...
Dear kegzykent TTP LabTech have designed an excellent de-capping system that will de- cap/re-cap the AbGene MULTISIP Split septum plugs - I've just discussed ...
Zinsser offers solid glass plates - these are shown on this web page: http://zinsserna.com/reactor_plates.htm - Jim Schools (Director of Marketing, Zinsser NA)...
... Makes mainly teflon plates, but they say they will make custom plates in quartz and glass. ... This url...
ezracolbert@...
Dec 6, 2007 4:21 am
5907
Hi everybody, We would like a buy a plate sealer which may be integrat a robotic HTS system (with RS232 comm.). What is your mention which manufacturer what...
Bielik Attila
a.bielik@...
Dec 13, 2007 6:18 am
5908
Hi everyone, It's been a while but I finally put together the first issue of the ezine. You will find it on http://www.robotic-laboratory.net/ This is my first...
Hello I was wondering if anyone had any experience using fluorescence calibration plates. something that will not photo bleach. Matech seems to be the only one...
Attila, Depends on you choice of seals (foil or adhesive). We have had great success integrating a number of Velocity11 PlateLoc's and ABgene ALPS's. ...
Hello BioRobot Dude, Finally, after 12 years, there is an LRIG question that I know something about. (Hopefully Andy will not think my reply is too...
G. S. Hudson
gshudson@...
Dec 15, 2007 7:45 am
5912
Hello Attila: I can only speak for the ALPS 3000, but it can been integrated into almost any system via RS232. There are 7 available seals depending upon your...
Hi Attila, I have used V11's Plateloc for a couple of years and have to say it is a great machine, which you can either use integrated or in standalone mode. ...
Hi Attila, I would recommend you "Robo-Seal" of HJ-Bioanalytik. http://www.hj-bioanalytik.de/english/frame_robo.htm This product extremely robot friendly,...
I am trying to find the best way to pulse down a couple hundred PCR plates at the end of a long day, just prior to loading them all in the stackers that...
Hello Group I am looking for the serial Commands For Symbol LS-1220-I300A Barcode Reader integrated with our Thermo CatX CRS500 running on driver (20.2TS) from...
Hi Mark, have you tried called Motorola's hotline (Symbol now belongs to Motorola)? I did it once because I needed precise information on the serial cable to ...
Mark, I was surprised you could not find the information you needed because Symbol used to be so good at providing manuals online. It is not trivial from the ...
Terry Iorns
tiorns@...
Dec 19, 2007 6:32 pm
5919
Mark, I found a copy of the Product Reference Guide and will email it to you directly. Regards, KK Kevin Keras Business Unit Manager Caliper Life Sciences...
If I recall correctly, Savant (now part of Thermo Fisher) used to offer a large concentrator under the SpeedVac name. I did a quick search but could not find...
The Laboratory Robotics Interest Group Discussion Group is for comments or questions about Laboratory Robotics and Automation. You receive messages posted to...
lrig-discussion@yahoo...
Jan 1, 2008 8:52 am
5922
Is anyone familiar with the eGene HDA-GT12 12 channel capillary electrophoresis system? eGene has been purchased by QIAGEN and I have some concerns about that ...
Mlejnek, Ron
Ron.Mlejnek@...
Jan 7, 2008 2:26 pm
5923
I have inherited an 2001 Acquest Screenstation and have attempted to get it running using Screenplay. I was able to install the Screenplay software but it...
