The Laboratory Robotics Interest Group Discussion Group is for comments or questions about Laboratory Robotics and Automation. You receive messages posted to...
lrig-discussion@yahoo...
Apr 1, 2008 8:04 am
5979
Hi, Can anybody help me with a list of RS-232 commands for the Cytomat 2? There must be one of you who actually wrote their own interface for it, right? Best...
Hi Jacob! We wrote it, what is your problem? Best regards, Attila ________________________________ From: lrig-discussion@yahoogroups.com ...
Bielik Attila
a.bielik@...
Apr 3, 2008 4:49 am
5981
Hello, I'm doing a bit of research (may make a JALA submission out of it if you would like to join in), in addition to automation - I have done (and mainly do...
Neil Benn
neil.benn@...
Apr 3, 2008 4:49 am
5982
Hi Jacob try to contact Stefan Czwak Technical Specialist Cytomat / Incubators at Kendro Tel.: +49 (6184) 90-6367 Fax: +49 (6184) 90-7367 E-Mail:...
You've raised a interesting issue, one that has in part contributed to the work I'm currently doing. The places where open source software exists, and why it...
LRIG members, I have a BioMek FX with a single 96 channel pod. There has been a persistent problem using the grippers in the most forward plate nests. It has...
GRAY (James Gray)
grayj@...
Apr 11, 2008 3:45 am
5985
Hi, Does any of you have a experience comparing fluo and luminescence cameras in both machines? Is the new ICCD camera on Tetra+ just as sensitive for...
Hi all, My first posting to this group, although I'm a member of ELRIG. Anyway, I'm looking for information on the serial communications protocol and command...
Hi, I had similar problems with earlier FX all the time - in my cases, the air tubings actually came off, so it was very obvious it was getting caught...
Hi, I experienced this problem a number of times on different FX's Most of the time it occurred it was due to the pneumatic air hose getting kinked when the...
Hi Robin, Are you trying to integrate a Twister I or Twister II? And are you planning to make calls through RS232 commands using MSCOMM or through the API of...
Dear All, I am looking into available automation of probe preparation for microarrays. We work with Affymetrix resequencing arrays but set-up methods will be...
Agnieszka, There are more liquid handling workstations available for you to choose from. Join the Simbiotix community and search for liquid handler or...
The last time I spoke to Affy they were about to automate their service lab. It might be worth getting your rep to put you in touch with the lab manager. Affy...
For low-throughput microarray preparation, you could consider BioTX Automations WellAware pipetting systems. They recently added electronic protocol...
Dear, I used a FDSS 6000 reader for several years. You can contact me off line for discussion if this can help you. My email address:...
Thierry Christophe
thierry.christophe@...
Apr 22, 2008 2:59 am
5996
Hi Neil We can probably offer you something through our distributorship of the KEMS systems. If you are interested please contact me off-line and let me have...
David Ley
david.ley@...
Apr 22, 2008 3:00 am
5997
Hi Neil I've been working with the LabView programming language for many years now. One of its many advantages is that there are several lively open source ...
Hi Kai, I'm looking to use MSCOMM to control the Twister. It's a Twister I and I have no documentation at all for the control codes for it. I presume it has a...
We are wrapping up the spring semester here at Montclair State University and every year the students in the senior level Instrumental Analysis class have a...
Hello, I am trying to locate someone to provide labels, ribbons and thermal transfer printers for labeling microtitre plates who are located in Germany - does...
Neil Benn
neil.benn@...
Apr 28, 2008 7:51 pm
6001
Greetings. I have a poser and would welcome recommendations. Feel free to correct me at any stage. Where I work we do a bunch of assays based on small volume...
Hi Neil There is e.g. Cybio.. The device is easy to use and runs automatically. The labels are very good and reliable. But they do not offer a thermal printer...
Dear Andrew, With tartrazine, you have to prepare a control at the same concentration and using the same stock solution to compare because, at least in our ...
Thierry Christophe
thierry.christophe@...
Apr 30, 2008 2:34 pm
6004
Sigma tartrazine is fine, so I suspect it is your protocol If you could describe in detail what your protocol is, and what the data are, and what your...
ezra s abrams
ezracolbert@...
Apr 30, 2008 2:34 pm
6005
Hi Andrew, Yes, I know your pain of preparing standard curves, dye reagents, etc. Not fun. My company makes absorbance-based systems for the purposes of QC'ing...
Hello, Hmm, what do you mean by a standard in this case? For example you can get something that is a plastic and will always absorb at 405nm - I think I had...
Neil Benn
neil.benn@...
Apr 30, 2008 2:35 pm
6007
The Laboratory Robotics Interest Group Discussion Group is for comments or questions about Laboratory Robotics and Automation. You receive messages posted to...
