Please send me the PIX. Mike 50 3100 i tired to upload a ZIP file to photos but didnt work. email me offlist for the zip file. ah-ha! i just read my...
The good news is the truck and I are OK. Learned a few lessons. About 2 years ago, I bought a "deluxe" turn signal switch. The chrome guy that most of the...
I had a similiar thing happen years ago. After an accident in a VW bug, the repair shop rewired the running lights wrong; ground went to the filament and the...
I finally stumbled upon an early seventies Chevy one ton truck with a 4.56 rear gear. The truck was headed to the scrapper and the scrap metal dealer allowed...
Thanks for the input Nate. It runs 160 in short hops around town and ran 190 on a recent 60 mile trip. There is an A/C condenser in front of my radiator....
You might try http://www.kajunjon.com/ or just keep an eye out for a whole trany being auctioned off. In the other group, someone posted they got tranny parts...
I did some on Old Red over the weekend. I recorded my activities on my blog site http://jimitye.blogspot.com/ This is not spam, as I don't make a dime off my...
LOL ! I still use this to remember the firing order of old Babbit pounders but I'm partial to the over 40 ladies now , they don't yell , they don't smell and...
Wow , that sux . Electrical fires can burn your ' Ship of The Highway ' to the water line in 15 minutes... Last time I checked , Signal-Stat still made it's...
This is entirely correct ~ 190* is perfect . If you space the AC condensor 1" away from the radiator , it'll increase it's efficiancy quite a bit and the...
I'm keen to read of work done but I have very limited time and computer acess so posting it here rather than a link to your blog would be good for those of us...
On Tuesday, Nate wrote: LOL ! I still use this to remember the firing
order of old Babbit Pounders but I'm partial to the over 40 ladies now , they don't...
mr55chev
mr55chev@...
Sep 5, 2006 5:43 pm
32287
I post it on my blog because I include 3 or 4 pictures with every post. If I post pictures here, people beef about it, especially webtv users. vwnate1...
ok thats cool go ahead and delete which everones you dont think should be in there, they have been posted for a long time now, this is the frist complent i've...
I have on my '52 1/2 ton what I think are the original rims. They are 16" by 4". The tires I've taken off are stamped 600-16, which are no longer holding air...
Kevin I'll give you my 2 cents worth on this. I think you are positively correct to go with the steel belted radials. It makes a huge difference in the ride....
Whats the deal with the rubber wheel in the 49 dealer installed turnsignal switch? can it be set to rub the steering wheel and self cancel or am I missing a...
I saw those wheeled varities during my search. I can't see any way to make them work on these trucks without cutting hole in the mast and I am not sure they...
Hm , O.K. I can see that as Yahoo groups doesn't like pix attached and scrubs then as soon as they go out so others cannot see them when reading posts from the...
The tire shops you're dealing with are lazy , lying jerkoffs . I use Dayton tires (good stuff !) _VERY_ affordable at the chain tire store with the big green...
Yes ~ you simply loosen the clamp and slide the switch up untill the rubber wheel is touching the flat underside of the steering wheel.... I never liked this...
O.K. , I looked at it and read some stuff , looks like you're making progress on your truck ~ you do know the engine should be _grey_ in color , right ?...
The message is ready to be sent with the following file or link attachments: ATT00001 Note: To protect against computer viruses, e-mail programs may prevent...
John & Sherry
scowdin@...
Sep 7, 2006 11:32 pm
32298
I've contact three reputable tire shops to ask about the tires mentioned below - LT215/85R16. Yes, they are available. But all of the shops said the tires...
I know about the color thing and have used the gray on other trucks, but this one...well I'm taking some artistic license. Little things about the life of the...
Read my first line again , these idiots will do anything to avoid working with old rigs . I have original one piece narrow 16" rims and I've been _working_ my...
