Royal Enfield Mailing List - a note from the moderator "Guidelines for Use"... sent automatically on joining, and each month thereafter. Updated occasionally. ...
royalenfield@yahoogro...
Oct 1, 2005 10:08 am
42725
Hi I have just joined this group, having come back to biking after a 26 year gap. I have bought a Classic 350 Bullet and look forward to getting to know it...
My 500 was losing all that oil. It was going on the left side of my rear tire from the "duckbill". I got a new oil cap/dipstick, and that seems to have fixed...
Ed, My 500ES is fitted with tan solo seat and pillion pad along with the leather saddlebags. There are several pictures of the set up on the site in the folder...
After two weeks of searching for an appropriate 20 weight oil , with no success , for in my primary case , I gave up and converted mine over to tranny...
Hey everyone, here goes... Last night at work, I walked out to check the weather, and of course admire the beautiful lack bullet park out there. However, I...
... Now, THAT is very interesting! May one enquire which venting system your bike has? The only thing I can imagine that would bring this situation about...
I have purchased sae 20 non-detergent oil from my local NAPA auto parts store. They do not keep it out front, I have to ask for it. This is what I am...
first eliminate the most worrisome possibility. check for oil flow at the tappet adjustment window. from the sounds of the leak at the head/ barrel joint it is...
My bike, a 2000 500, Just has the duckbill breather. I didn't install it and I don't know anything else about the venting. The bike was used and had a fair...
I looked at NAPA but didn't ask. Wayne in Ohio ... From: robert sr. newman Sent: Sun, 2 Oct 2005 13:25:16 -0700 To: royalenfield@yahoogroups.com Subject: Re:...
... Debby, I have fitted some NOS Metzeler Trials Universals obtained from Speed and Sport http://www.speedandsport.com/tires.html to my 2000 model 500. They...
Just a little thinking out loud on the subject of SAE20 vs ATF: My thinking is that the original recommendation was drafted in 1949 when they dreamed up the...
That was kinda my thinking , having worked on an auto tranny or three!!!! Wayne in Ohio ... From: Pete Snidal Sent: Sun, 2 Oct 2005 18:27:23 -0700 To:...
egroups (yahoo) allow 30mb of space for all members of a group to store some stuff on their site. So what you read (Using 29.69 of 30 MB (98%)) means that 98%...
Switching to atf is one of the best things that you can do for your bike. It took me a bit too long to make the change because my other machines had been of...
... That's not YOUR album; that's the whole kaboodle. It means that, as usual, we're full. Time for some of us to look through what we've put up in the photos...
Hi, Can anyone tell me what is the size of the handlehar of a RE? 7/8" or 1" ? I want to replace some controls and would like to make sure I order the right...
I'm looking at my Owner's manual for my 2004 Sixty-5 and it recommends 15W 40 under the heading "Clutch." See page 69 if you have this manual. It isn't easy...
My 2001 500cc has 7/8 handlebars. Wayne in Ohio ... From: Martin Beaulieu Sent: Mon, 3 Oct 2005 16:36:21 -0700 To: royalenfield@yahoogroups.com Subject:...
For the elusive nut, try Ace Hardware. They have a bin of them. For the chaincase, my dealer sold me a quart of chaincase lubricant. It has worked for me. The...
Wayne: The problem was that the head needed to be retorqued. I took off the valve covers and the bolt on the righthand side of the intake was not even finger...
No, that's not a compression ratio -- it's the ratio of car:bike miles over the past weekend. I trailered the Enfield to suburban DC, from whence my daughter,...
